Magnetic Guide Sensors
The Simplest and Most Reliable Guiding Technique for AGVs
Roboteq’s Magnetic Guide Sensor is capable of detecting and reporting the position of a magnetic field along its horizontal axis. Our sensor is intended for applications in Automatic Guided Vehicles (AGVs), using inexpensive adhesive magnetic tape to form a guide on the floor.
Build an AGV with Only Two Components
A complete, Magnetic Guide following AGV can be built with just an MGS1600 sensor and one of the many dual channel motor controllers in our catalog.
We have prepared an Application Article, complete with descriptions, drawings and programming code to show you just how simple it is.
Watch the Video: How the Magnetic Guide Sensor Works
Superior to Other Guiding Techniques
|Technique||Easy to Lay||Easy to Change||Passive||Dirt Imune||Invisible|
Compared to other guiding techniques, magnetic guides are totally passive and therefore easy to lay and modify. The tape creates an invisible field that is immune to dirt and unaffected by lighting conditions. The magnetic track can be totally hidden under any non-ferrous flooring material.
Precise, Sensitive, Fast
Effective Forks and Location Markers Management
The sensor simultaneously follows and reports the position of two (left and right) tracks. With this information, the AGV can be made to follow the desired path at forks.
The sensor can also detect segments of tape of opposite magnetic polarity as location markers. Left and Right markers can be individually detected. Additional location information can be encoded using different marker lenghts and patterns.
Easy to Interface with Anything
The MGS can be interfaced directly with any of Roboteq’s motor controllers in order to create an effective AGV solution with just two components. The sensor can also be connected to any PLC, PC or single board computer using a choice of Analog, PWM, RS232, USB or CANbus interfaces.
Tough and Tougher
Chose between ABS plastic with 2m cable, or all-metal with a waterproof industrial M12 connector.
See the Invisible, Run Virtually
The shape of the track's and marker's magnetic field under the sensor can be visualized in real-time in Roboteq's free PC utility. This unique capability takes the guessing out of troubleshooting.
Use our free simulator to easily develop and test your Magnetic Track following AGV from your PC.
Flexible and Durable Magnetic Tape
Tape is available in 25 and 50mm width. The wider tape offers a larger adhesive area and is very well suited for use in heavy traffic areas. The tape is easy to lay and can be bent to create virtualy any shape paths.
For heavily traveled areas Roboteq offers a 5x5mm square tape that can be inserted in a groove carved into the floor.
Chosen by the World's Top AGV Makers
Roboteq's Magnetic Guide Sensor is the World's most accurate and most versatile MGS. It is the easiest to integrate, monitor and troubleshoot. No wonder it has been selected by the World's Finest manufacturers for their Magnetic Guided AGV's.
Garanteed Success and Satisfaction
|Our magnetic guide sensors are the world's most sophisticated and versatile. They are also the easiest to use thanks to our detailed documentation, software tools and application examples. However, should you run into difficulties you can rest assured that you will always get timely and accurate answers from our Support team. After all, we can only succeed if you succeed!
Flexible magnetic tape with high-bond adhesive for laying magnetic tracks. Available in 45.72m (150feet) rolls of 25mm or 50mm width, and 1.1mm thick. Precise and uniform magnetic strenght across the full width and length. Magnetic South side on top (North side on top available but not recommended). Short segments of North side tape available for use as Markers. Made of very durable material capable of withstanding foot and light vehicle traffic.
|MTAPE NORTH TOP25||Magnetic Tape roll 150' (45.7m) long by 1" (25.4mm) wide. NORTH is top side. Each roll is 13 lbs (6 kg). Not recommended for new installations||Product details|
|RTAPE25YL||Reflective Tape roll 82' (25m) long by 1" (25mm) wide. Highly reflective fluorescent yellow with adhesive on one side. Each roll is 0.5 lbs (0.232kg).||Product details|
|MTAPE25NR||Magnetic Tape roll 150' (45.7m) long by 1" (25.4mm) wide. SOUTH is top side. Each roll is 13 lbs (6 kg).||Product details|
|MTAPE SQUARE 5X5||0.197" width x 0.197" thickness x 50 FT length (5mm x 5mm x 15.24m) magnetic tape for MGS1600. Sold in 50 FT (15.24m) rolls.||Product details|
|MAGMARKER25||Magnetic Tape segment for use as Markers. 1" width x 0.045" thickness x 1' length (2.54cm x 1.1mm x 30.5 cm). North is top side. Product is shipped in standard 1-foot strips. Contact us for a continuous custom length requirement.||Product details|
|MIGHTY LINE 4IN YELLOW||Mighty Line Protective Tape Roll 100' (30.5m) long by 4" (101.6mm) wide. Adhesive on one side of tape. For use as protective cover over magnetic tapes.||Product details|
|MTAPE NORTH TOP50||Magnetic Tape roll 150' (45.7m) long by 2" (50.8mm) wide. NORTH is top side. Each roll is 25 lbs (11.4 kg). Not recommended for new installations||Product details|
|MTAPE50NR||Magnetic Tape roll 150' (45.7m) long by 2" (50.8mm) wide. SOUTH is top side. Each roll is 25 lbs (11.4 kg).||Product details|
|MIGHTY LINE 3IN YELLOW||Mighty Line Protective Tape Roll 100' (30.5m) long by 3" (76.2mm) wide. Adhesive on one side of tape. For use as protective cover over magnetic tapes.||Product details|
Precision magnetic sensor for detecting and measuring the position of a magnetic track along the horizontal axis, for use with Automatic Guided Vehicles and other Automation applications. Interfaces seamlessly with Roboteq motor controllers. Utilizes USB, RS232, and CAN for interfacing to any PLC, microcomputer or PC.
|MGS1600GY||Enclosed IP64 160 mm wide magnetic track sensor with 3-axis Gyroscope, serial, USB, analog, PWM and CAN output.||Product details|
|MGSW1600||All-metal, shock-resistant 160 mm wide magnetic track sensor with 3-axis Gyroscope, serial, USB, analog, PWM and CAN output.||Product details|
|MGSW3200||All-metal, shock-resistant 320 mm wide magnetic track sensor with 3-axis Gyroscope, serial, USB, analog, PWM and CAN output.||Product details|
|MGSW4800||All-metal, shock-resistant 480 mm wide magnetic track sensor with 3-axis Gyroscope, serial, USB, analog, PWM and CAN output.||Product details|
|OTS1600||160 mm Optical Track Sensor, serial, USB, analog, PWM and CAN output.||Product details|
Roboteq’s Flow sensor is a high-resolution sensor especially designed for accurate contactless X-Y motion sensing over all types of floor surface. It is intended as a navigation sensor or as a contactless safety encoder in wheeled mobile robot applications.
|FLW100||Contactless X-Y Flow sensor with AHRS, USB, RS232, PWM and CAN output.||Product details|